
Master Lock Box Guide
How to Change the Code on a Master Lock Box
For a Master Lock box reset, call (754) 342-6282 if the current code will not open the box; otherwise, open it with the current combination and identify whether your model uses a reset lever or a shackle.
- Open 24 hours a day, 7 days a week
- Mobile service: we come to you
- Typical arrival time: 15–30 minutes
- Lockouts start at $59
What to Check Before a Master Lock Box Code Change
- The current combination — You need to open the box with its existing combination before resetting the code. These steps do not open a box when you do not have the code.
- The model number — Look for the model number on the box or its packaging. Master Lock models can use different reset mechanisms, so identify the model before moving any control.
- A new combination — Choose a combination you can remember and enter it while the box is open. Keep the box empty until you have tested the new code.
- Model-specific instructions — Use the Master Lock support page to find the manual for your model if its reset control or sequence differs from the examples below.
Master Lock Box Reset Steps for Lever and Shackle Models
- Identify the reset mechanism — Check whether your box has a hinged compartment door with a reset lever, as on common 5400D- and 5401D-style boxes, or a resettable shackle, as on a 5900D-style portable box. Use the directions for your mechanism.
- Open the box with the current combination — Set each dial to the existing code and open the compartment or release the shackle normally. Take out any keys or other contents so you can test the new code before putting anything back.
- Put the reset control into its setting position — For a 5400D- or 5401D-style compartment box, move the reset lever left and down. For a 5900D-style portable box, rotate the open shackle 90 degrees counterclockwise and press it down.
- Set the new combination — Keep the lever or shackle in its reset position while turning the dials to your chosen code. Align each number with the model’s dial indicator rather than leaving a wheel between numbers.
- Return the reset control — On the compartment-door style, move the lever up and right to its original position. On the portable shackle style, lift the shackle, turn it back to its original position, and release it.
- Close and scramble the dials — Close the empty box or shackle and turn the dials away from the new code. This checks that the reset control has returned to its normal position and prevents the code from remaining displayed.
- Test before storing keys — Dial the new combination and open the box again. If it opens correctly, scramble the dials once more, then put your keys inside and close it.
Need help now? (754) 342-6282
Why a Master Lock Box May Not Accept the New Code
The wrong reset sequence
A lever-operated box and a shackle-reset box do not use the same sequence. Check the model number and use its instructions rather than forcing a control into position.
A dial is between numbers
A wheel that is not aligned with its indicator can prevent the code from registering. With the box open, line up each number carefully and repeat the setting sequence.
The reset control did not return fully
The new code may not take if the lever or shackle remains in its setting position. Return it to its normal position before scrambling the dials.
The mechanism is sticking or damaged
Resistance, a loose dial, or a control that will not move can point to a mechanical problem rather than a code-entry mistake. Stop before applying force, which can damage the box.
When a Stuck Master Lock Box Needs a Locksmith
Call a professional if the box will not open with the current combination, a dial or reset control is damaged, or you cannot complete the reset without forcing a part. We provide mobile locksmith service and come to you; for a Master Lock locksmith or help with a stuck box, contact us at (754) 342-6282. We do not provide instructions for bypassing a box or opening it without the code.
Need help now? (754) 342-6282
Frequently asked questions
Can I change the code on a Master Lock box while it is closed?
No. You need to open the box with the current combination before you can reach and operate its reset mechanism. Keep it empty until you have tested the new code.
Do all Master Lock boxes reset the same way?
No. Some compartment-style models use a reset lever, while some portable models use a resettable shackle. Check the model number and use the instructions for that specific box.
What should I do if I forgot the current combination?
The reset procedure requires the box to be open, so it will not reset a closed box without the current code. Contact Master Lock for model-specific support or call a locksmith for help with the box.
How can I tell whether the new combination worked?
With the box empty, scramble the dials and then enter the new code to open it again. Store keys only after that test succeeds.
Need Help With a Stuck Lock Box?
Call (754) 342-6282 for mobile locksmith service. We come to you when a box will not open or its reset mechanism is damaged.